Komatsu HB365LC-3 Hydraulic Excavator
Komatsu HB365LC-3 Hydraulic Excavator
Komatsu HB365LC-3 Hydraulic Excavator Information
Download Komatsu HB365LC-3 Hydraulic Excavator Product Brochure
The HB365LC-3 is Komatsu’s latest generation hybrid excavator, utilizing a Komatsu SAA6D-114E-6 Tier 4 Final engine and electric swing drive to reduce fuel consumption by up to 20% (depending on the application). The electric swing motor-generator is more efficient than a conventional excavator, capturing wasted kinetic energy and storing it in a Komatsu ultra-capacitor. Stored energy from the ultra-capacitor is then sent to either the electric swing motor, or an engine mounted motor-generator to provide fast response from an ultra-low 700rpm idle speed. The new hybrid HB365LC-3 continues to raise the industry bar for hybrid technology and fuel savings with an excavator that has both power and efficiency, while reducing environmental impact.
Standard Equipment
ENGINE
- Auto idle
- Auto idle shut down programmable
- Automatic engine warm-up system
- Dry type air cleaner, double element
- Engine, Komatsu SAA6D114E-6
- Engine coolant to -25°C -13°F
- Engine overheat prevention system
- Fuel pre-filter (10 micron, with water separator)
- Fuel priming pump
- Viscous fan clutch, temperature controlled
HYBRID SYSTEM
- Ultra capacitor with inverter
- Electric swing motor/generator
- Engine mounted motor/generator
- Hybrid component cooling system
ELECTRICAL SYSTEM
- Alternator, 24 V/90 A
- Batteries, large capacity (2 x 12V)
- Battery master disconnect switch
- Electric horn
- Power ports (2) 24V to 12V
- Starting motor, 24 V/11 kW
- Working lights, 2 (Boom and RH front)
HYDRAULIC SYSTEM
- Arm holding valve
- Boom holding valve
- Power maximizing system
- PPC hydraulic control system
- Service valve, one additional function
- Two-mode setting for boom
- Working mode selection system
GUARDS AND COVERS
- Carbody swivel guard
- Pump/engine compartment partition
- Revolving frame deck guards
- Revolving frame under covers
- Slip resistant plates
- Thermal and fan guards
- Track roller guards (center section)
UNDERCARRIAGE
- 3 speed travel with auto shift
- Carrier roller (2 each side)
- Hydraulic track adjusters (Each side)
- Track roller, 8 each side
- Track shoe, triple grouser, 850 mm 33.5″
OPERATOR ENVIRONMENT
- Auxiliary input (3.5 mm jack)
- Automatic climate control/air conditioner/heater/defroster
- High back air suspension seat with heat
- Large high resolution 7″ LCD monitor
- Lock lever, work equipment
- Mirrors (RH and LH)
- Operator protective top guard (OPG), level 1
- Rear view monitor system – one camera
- ROPS cab (ISO 12117-2)
- Seat belt indicator
- Seat belt, retractable, 76 mm 3″
- Secondary engine shut down switch
- Skylight, opening
OTHER EQUIPMENT
- AM/FM radio
- Counterweight, 6320 kg 13,933 lb
- Equipment Management Monitoring System (EMMS)
- KOMTRAX® level 5.0
- Operator identification system
- Radiator and oil cooler removable debris screen
- Rear reflector
- Travel alarm
Optional Equipment
Arms
- 3185 mm 10’5″ arm assembly
- 3185 mm 10’5″ arm assembly with piping
- 4020 mm 13’2″ arm assembly
- 4020 mm 13’2″ arm assembly with piping
Booms
- 6500 mm 21’3″ HD boom assembly
- 6500 mm 21’3″ HD boom assembly with piping
Cab guards
- Lower front window guard
- Full front guard, OPG Level 1
- Full front guard, OPG Level 2
- Bolt-on top guard, OPG Level 2
Other
- KomVision surround camera system
- Hydraulic control unit, 1 actuator
- Proportional control handles for auxiliary hydraulics
- Rain visor
- Revolving frame undercovers, heavy duty
- Sun visor
- Track roller guards, full length
- Track shoes, triple grouser, 700 mm 28″
- Track shoes, single grouser, 800 mm 31.5″
- Working lights, front, two additional cab mounted
Engine
HORSEPOWER | 269 @ 1950 rpm |
Performance
OPERATING WEIGHT | 81,791 - 85,495 lbs |
BUCKET CAPACITY | 0.89 - 2.56 yd³ |
List of Features
Manufacturer | Komatsu |
Category | Excavators |
Subcategory | Large |
Model | HB365LC-3 |
Condition | New |
Year | 2021 |
Hours | 0 |